Questions and electrical advice in the Periodic Inspection Reporting & Certification - This Section is STRICTLY for testing PROBLEMS which members have occured, misunderstood readings, Periodic Inspection Reporting / Electrical Installation Condition Reports, Mathematical Equations/Solutions, Part P and other legislation which require you to Inspect and Test..
Some popular forums: Electrical Forum - Electrical Wiring, Theories and Regulations - Periodic Inspection Reporting & Certification - Electrician Jobs
Search the forum,
Forum Prefix Filter
-
All threads
USA
Australia
Canada
UK
Ireland
New Zealand
JIB Electrotechnical Certification Scheme (ECS)
BECSA Competent Person Scheme (CPS)
ELECSA Certification Scheme
Stroma Certification Scheme
NAPIT Certification Scheme
Benchmark Certification Scheme
Select (Scottish) Certification Scheme
SJIB (Scottish) Certification Scheme
OFTEC Self-Certification
NICEIC Certification Scheme
Hello everyone, I'm wondering if someone could help me with some EICR coding. I am aware that bringing mains tails into a fire rated consumer unit...
Good Evening. I’m currently carrying out an EICR. I have a cooker circuit radial with a 32amp mcb fed from and RCD split board. There is a 45amp...
Looking for some advice on how to carry out a IR test on a 3-phase motor and a TP & N skt, these are parts of a module I have failed on a test and...
EICR picked up no continuity on cpc on 3 pendants fittings in a grd Floor Flat.
Zs measured @ other pendants & complies.
Different opinions on the...
I have been asked to look at this report as the customer has been given (in their words) 'A very high quote plus VAT'.
It doesn't look well...
Off-peak consumer board supplying storage heaters has no RCD protection. Does this require upgrading to comply with latest landlord regulations.
Hi, while carrying out an EICR at a farm cottage on Friday i came up against a problem early on. Whilst measuring the Ze the reading i obtained...
Hi All
New to this forum.
Im currently doing a Electrical condition report on a domestic house that I have just fitted a dual RCD board and...
A pull-cord shower switch is located in Zone 2 of a bathroom, including the ceiling base containing the electrical connections. With a little...
Rcbo tripping on 1/2 settings with load connectted but ok when load disconnected all other tests are fine… FI required but any thoughts on this😎
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
IP66 outlet sockets in garden areaI know that, only as I said previously in my post is for.
- Latest: manos
-
-
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.