Search the forum,

Discuss Led security light query in the DIY Electrical Advice area at ElectriciansForums.net

Evans8773

DIY
Reaction score
0
Hi all, I have just replaced my old broken security light with the light in the following link.

FEAHRZEUG 30W Security Lights... https://www.amazon.co.uk/dp/B09NKN99VH?ref=ppx_pop_mob_ap_share

When I wire the light up with the old lights wire it is very very dim.

When I wire the light into a plug it’s works perfectly.

Ideally I need it to be wired to the old lights wiring. I have tried with wago connectors just to see if it works properly and also tried with another junction connection and all same result a very dim light.

So as it stands the only way it works as it should is if wired to a plug.

So does anyone have any idea why the original lights wiring will only produce a dim light

Thanks in advance

Mark
 
TL;DR
G S

Reply to Led security light query in the DIY Electrical Advice area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top