-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
Questions and electrical advice in the Australia - Australian Electrical Advice Forum for Professional and DIY Electricians Alike..
Some popular forums: Electrical Forum - Electrical Wiring, Theories and Regulations - Periodic Inspection Reporting & Certification - Electrical Jobs
The Pub (Aussies Only Area)
The Pub is for Aussie Electricians Only
- Threads
- 0
- Messages
- 0
- Views
- 0
None
- Sticky
IMPORTANT: Please note that nobody on this forum should be seeking or providing advice to people who are not competent in their field. If you live...
- Sticky
If you're an Australian member give us a shout. The forum is now open to you. We hand you guys the keys at midnight UK time so the floor is yours...
- Sticky
I wrote this in another forum, so hope it might help a few out! I am quite often asked "what is it you need to do to get a work visa for...
- Sticky
Right chaps,
Due to a few unavoidable issues, we have lost the original thread and pics etc.
Sorry about that!!!
So, if you want to re-upload...
- Sticky
Hi ALL
Just thought id put this one up for all those faults we find.
heres one to kick it off !
Domestic RCD tripped and wouldnt reset cause was...
Hi guys how we all doing.
I’m seriously thinking of moving me and the family to Australia but don’t know how to go about it.
I have my electrical...
- Question
If on a 'flexible' roster & you are off work when a public holiday falls are you entitled to it? Employed full time
swing over xmas period 22nd dec - 5th Jan. Currently on $60 flat, any ideas on what figure to request
Have an isolator switch with 20mm screwed entries into the bottom. Have existing 25mm conduit I want to run into it. Ideally I need a simple...
I have today come accross my first polarity problem.
while checking a socket i found it was showing reverse polarity with L and N.
After checkig...
Hi,
I have a coaxial wall plate that is hanging off the wall and needs replacing. How do I wire the old plate which has an IN and OUT for the...
Long shot but thought I’d try, have a lighting circuit that trips the RCD as soon as the neutral touches the neutral bar for said RCD. Bypass that...
I would like to get some information on what protection is on a multi meter when accidentally testing a live circuit while the meter is on the...
This may be quite hypothetical for now, but can I take a feed out of the incoming side of an FCU (If it was either a radial or Ring Final) to feed...
Hi, recently moved into 30 year old home. We were renovating it for a few months and didn't notice this issue. 3-4 times over last month the power...
Hi, Trying to wire this 3phase switch as single for a table saw, told I could do this from guy at Haymans, even told 2nd time which wires to...
Hi all, with majority of new builds adopting loop at the switch for residential lighting circuits these days, am wondering if any one still...
I've wired some cable to a small 3x3 shed with 2 gpos, a 15a GPO, and a light. The shed is about 2m away from the house on a concrete slab.
The...
Any ideas on joining a 16mm T&E.
Its fed from a main switch up into a flat. Its mechanical sound just to short to reach new board. it needs to...
Hi All,
Seeking some thoughts on my own Omega free standing 900mm oven.
Over the past year the oven has been tripping the supplying RCBO unit.
I...
Hi guys, I'm trying to find a definitive answer on the use of 1.5mm 2C+E for power points in a transportable structure which is fed by a 15A inlet...
Hi guys.
I have a problem. Last night my partners dads lights went out at his home. He called out a guy who had a look round and found that the...
If one of your coworkers suffers a severe electric shock, your first instinct will most likely be to rush to their rescue. But first, pause and...
Hi
Can anyone help me locate any 63amp BARDUCT MK1 Tap Off Boxes we have tried the Seimens replacement but these are of no use.
Either New or...
Can I use three phase cable to wire single phase
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
LED Strip leaking AC reading.I opened up a LED lamp that measured leaking AC voltage 70 Vac and sometimes after on is 78 Vac...
- Latest: benxxxx
-
Fuel Gauge needle moving with revs issueOK, now I get it! :D I'll check that tomorrow and report back.
- Latest: Tarlow
-
To be reactivated or not to be reactivated?Got ya. I am using the wrong tester device. ... as it's not a GFCI circuit. Anyway, houses in...
- Latest: kcanning
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.